Aquaride combines a traditional structure with great ascensional capacity due to its particular pattern that oversizes the lobes and is extended to the hips.
Its profile is especially hydrodynamic which turns it into a jacket with an unusual relationship between ascensional capacity, stowage volume and underwater facility of advance.
It’s also a very equilibrated model in terms of lightness, resistance, pocket capacity, comfort and low price.
This all-terrain jacket incorporates the 2.0 version of weight system LOCK AID SYSTEM, now just as safe and easy to manage but with a lighter structure that allows using the jacket also without the weight system.
On the dorsal side of the jacket, two weight pockets allow a perfect layout of the weight in axis with the tank.
The semi rigid back pack fulfills its function of stabilizing the tank almost without adding weight and with a minimum volume.
The accessories’ provision is really complete: abdominal elastic adjustable strap and completely separated from the sack, attractive back pack’s pad of neutral buoyancy, stainless steel D-rings with angular design and “Y” hose carrier.
Technical features:
Sizes from XS to XL
Great ascensional capacity due to its particular pattern that oversizes the lobes and is extended to the hips. It has an especially hydrodynamic profile.
Sistema de lastre LAS (2.0) LAS 2.0 weight system reduces drastically the total volume of the mechanism, especially the one that is integrated in the vest, making it much more flat, light and discreet. New gummy-touch handle assembled directly on the pocket. LAS allows the weight management to be automated and intuitive, even with the vest on and in bad conditions (in flotation, with rough sea, etc.). The pockets, which enter perfectly channeled in their position, and a D-ring set on the manhole facilitate the fabric tend and the directly bag entrance.
+Info
There are two fix weight compartments between the back pack and the chamber, in axis with the diver’s body and the bottle. They’re really useful to define the diver trim.
Direct System Inflator 2011. Metallic filter on the low air entrance, on the rods and cylindrical filter around the valve. It has a remarkably robust body with attractive design. The inflating velocity has been rebalanced, 50% higher. “Anti-sand” design with minimized oral inflator nozzle. The pusher has a wide gap in relation to its main seat to avoid the sand blocking action. It also has watertightness emptying pusher via exterior D-ring and a new really resistant windpipe with a progressive curvature. It includes guide-hose clamp.
It has ventral strap separated from the sack to avoid compressing the diver’s body during the swelling and sash of adjustable length.
It includes compartments to carry the octopus and the manometer.
It also has chest elastic strap, angular D-rings and 50 mm belts.
Minimalist back-pack with thicknesses reduced to the maximum to lighten it. Ultraresistant and semiflexible material. Absorber in thermoplastic rubber for better fixation of the bottle. Possibility of double straps. It includes safety girth for fixation of the jacket to the plumbing fixtures.
Great ascensional capacity due to its particular pattern that oversizes the lobes and is extended to the hips. It has an especially hydrodynamic profile.
Sistema de lastre LAS (2.0) LAS 2.0 weight system reduces drastically the total volume of the mechanism, especially the one that is integrated in the vest, making it much more flat, light and discreet. New gummy-touch handle assembled directly on the pocket. LAS allows the weight management to be automated and intuitive, even with the vest on and in bad conditions (in flotation, with rough sea, etc.). The pockets, which enter perfectly channeled in their position, and a D-ring set on the manhole facilitate the fabric tend and the directly bag entrance.
+Info
There are two fix weight compartments between the back pack and the chamber, in axis with the diver’s body and the bottle. They’re really useful to define the diver trim.
Direct System Inflator 2011. Metallic filter on the low air entrance, on the rods and cylindrical filter around the valve. It has a remarkably robust body with attractive design. The inflating velocity has been rebalanced, 50% higher. “Anti-sand” design with minimized oral inflator nozzle. The pusher has a wide gap in relation to its main seat to avoid the sand blocking action. It also has watertightness emptying pusher via exterior D-ring and a new really resistant windpipe with a progressive curvature. It includes guide-hose clamp.
It has ventral strap separated from the sack to avoid compressing the diver’s body during the swelling and sash of adjustable length.
It includes compartments to carry the octopus and the manometer.
It also has chest elastic strap, angular D-rings and 50 mm belts.
Minimalist back-pack with thicknesses reduced to the maximum to lighten it. Ultraresistant and semiflexible material. Absorber in thermoplastic rubber for better fixation of the bottle. Possibility of double straps. It includes safety girth for fixation of the jacket to the plumbing fixtures.